Elusiveinc,
This is what I use for a program to operate a third tail light. It uses a 10F222.
asm
__CONFIG _MCLRE_OFF & _CP_OFF & _WDT_OFF & _IOFSCS_4MHZ
movwf OSCCAL ; load factory osccal value at start-up
bcf OSCCAL,0 ; Set GP2 as I/O pin
ENDASM
|
Re: Pic10F202 Master clear will not turn off.
Elusiveinc,
This is what I use for a program to operate a third tail light. It uses a 10F222.
asm
__CONFIG _MCLRE_OFF & _CP_OFF & _WDT_OFF & _IOFSCS_4MHZ
movwf OSCCAL ; load factory osccal value at start-up
bcf OSCCAL,0 ; Set GP2 as I/O pin
ENDASM
Dave Purola,
N8NTA
EN82fn
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks