Receiving and treating multiple signals


Closed Thread
Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Sep 2006
    Posts
    747


    Did you find this post helpful? Yes | No

    Default Re: Receiving and treating multiple signals

    HI,

    this is one module i am going to try, all of these have the same frequency. ..
    Arduino 433MHz LoRa SX1278 long range RF

    ken

  2. #2


    Did you find this post helpful? Yes | No

    Default Re: Receiving and treating multiple signals

    You realy should look at nRF24L01+, that level of protocol all implemented in silicon, ACK, node address, retry, multicast, ACK with payload, automatic packet assembly (CRC, preamble, address), dynamic payload length, pipes, the list is endless, and all for practically no money $1.50/£1 per module on ebay. Several different modules are available, PCB, ceramic or exteral antenna, some with PA/LNA some without.

    George

Similar Threads

  1. Programming multiple pics with multiple programs
    By Luckyborg in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 3rd April 2013, 18:47
  2. Spwm signals
    By sangaboy in forum Test Area
    Replies: 3
    Last Post: - 7th January 2012, 20:09
  3. How to read analog signals?
    By thm ov3rkill in forum mel PIC BASIC Pro
    Replies: 23
    Last Post: - 8th March 2009, 06:00
  4. IR signals
    By ruijc in forum General
    Replies: 1
    Last Post: - 14th May 2008, 15:53
  5. 3.3v signals to 5v signals
    By InitialDriveGTR in forum Schematics
    Replies: 12
    Last Post: - 7th February 2007, 23:43

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts