Defective ESP-07


Closed Thread
Results 1 to 11 of 11

Hybrid View

  1. #1
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Default Re: Defective ESP-07

    Quote Originally Posted by rsocor01 View Post
    Ooh, I see. Also, it took me a while to see that the difference between the "Not Good" and "Perfect" boards was the crystal oscillator installed with the wrong orientation.
    Darn, I missed that.

    I thought he had disconnected one pin on the rightside chip. It looks like the lower rightmost pin has the solder removed.

    (I didn't read the link, that would be cheating )


    I don't live in Europe, but I was in France with my eldest back in September.

    Allison doing her Titanic pose.
    Name:  France Allison Titanic.png
Views: 8158
Size:  141.0 KB

    I HAD to see the track.
    Name:  France Le Mans.png
Views: 5737
Size:  137.5 KB

    I had to return here and share with her Mont-Saint-Michel.
    Name:  France Mont-Saint-Michel.png
Views: 14122
Size:  117.7 KB

    Can't go to France without seeing the splendor of Versailles.
    Name:  France Versailles.png
Views: 9877
Size:  195.2 KB
    Last edited by Demon; - 13th April 2016 at 17:36.
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!

  2. #2
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Default Re: Defective ESP-07

    For other Canadians:

    3.6 Amateur Service

    The amateur service will continue to have secondary status in the band 902–928 MHz throughout Canada. All types of emission are permitted. Amateur licensees are advised to consult with the Department to avoid operation on frequencies or sub-bands used by radio systems authorized on a primary basis in that area.
    http://www.ic.gc.ca/eic/site/smt-gst...g/sf01054.html


    So be careful what you buy off eBay or other sources.
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts