porta.0 and porta.2 only goes high with HIGH command with PIC18F45K80

Closed Thread
Results 1 to 10 of 10

Hybrid View

  1. - 27th January 2015, 10:34 #1
    bmoe79's Avatar
    bmoe79
    bmoe79 is offline Junior Member
    Join Date
    Dec 2014
    Posts
    12

    Did you find this post helpful? Yes | No

    Default Re: porta.0 and porta.2 only goes high with HIGH command with PIC18F45K80

    Setting the outputs with latx.x instead of portx.x solved the problem.
    Tanks.
  2. - 27th January 2015, 14:57 #2
    Tabsoft's Avatar
    Tabsoft
    Tabsoft is offline Member
    Join Date
    Jan 2013
    Location
    Texas USA
    Posts
    229

    Did you find this post helpful? Yes | No

    Default Re: porta.0 and porta.2 only goes high with HIGH command with PIC18F45K80

    Glad to hear this got you moving ahead.

    There are plenty of posts on this forum regarding read-modify-write as well as a straight internet search on the subject if you want to understand the issue better.
    Regards,
    TABSoft
« Previous Thread | Next Thread »

Similar Threads

  1. PortA Doesn't Work
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 11
    Last Post: - 8th September 2015, 19:41
  2. PIC - receive data while pulsing pin from low to high and from high to low
    By skaarj in forum Code Examples
    Replies: 10
    Last Post: - 14th April 2014, 21:47
  3. high voltage high frequency H-Bridge
    By George in forum Off Topic
    Replies: 6
    Last Post: - 27th April 2009, 12:50
  4. AD works in Porta.0 but not in porta.1
    By ruijc in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 19th February 2008, 21:22
  5. turning gpio.0 high after pwm command
    By sirvo in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 21st February 2007, 19:22

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules