PIC16F886 not running.

Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. - 6th January 2015, 05:43 #1
    skimask's Avatar
    skimask
    skimask is offline Junior Member
    Join Date
    Dec 2014
    Posts
    7

    Did you find this post helpful? Yes | No

    Default Re: PIC16F886 not running.

    Osccon = %01100001
  2. - 6th January 2015, 06:16 #2
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,705

    Did you find this post helpful? Yes | No

    Default Re: PIC16F886 not running.

    default pbp3 fuse config
    __config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _LVP_OFF & _CP_OFF
    yet you have no pull up resistor on mclre_pin (1)
    no vss on pin 8
    no current limiting resistors for leds ( will cause rmw issues)
    what is that unspecified thing between portb7 and mclre ?
« Previous Thread | Next Thread »

Similar Threads

  1. 18F4550 running 3.3V (serin2) and 16F877 running 5v (serout2), is possible?
    By Pimentel in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 28th January 2014, 15:21
  2. Config problem PIC16F886
    By Bosse in forum mel PIC BASIC Pro
    Replies: 55
    Last Post: - 2nd January 2014, 07:24
  3. pic16f886
    By NURULHAIZA in forum General
    Replies: 5
    Last Post: - 21st May 2010, 09:09
  4. PIC16F886 Register Settings
    By aherrera in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 29th July 2009, 18:52
  5. Pic16f886
    By Larry in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 10th October 2008, 23:40

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules