Crystal Signal? Where is it???

Results 1 to 13 of 13

Threaded View

  1. - 26th June 2005, 09:52 #3
    Netjammer's Avatar
    Netjammer
    Netjammer is offline Junior Member
    Join Date
    Oct 2004
    Posts
    15

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Sharky
    Hi Netjammer,

    Maybe your problem is due to a floating Reset pin (pin 1 on your pic) try to tie it to Vdd through a 4.7K resistor.

    Regards
    Sharky
    Hi Sharky,
    I gave that a try and still no luck (used a 4.3K). I just now loaded one of those sample Lab X1 blink programs and verified it works on the Lab X1 board. It does. When I pull it out of the ZIF and install it on the breadboard I still don't get a clock on Pin 13 or 14. I also checked the programmer and it set for XT osc mode.

    Thanks for the response, I must be missing something...
    Netjammer-

    Last edited by Netjammer; - 26th June 2005 at 10:02.
« Previous Thread | Next Thread »

Similar Threads

  1. Sharing Crystal with 2 IC's
    By ShaneMichael in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 10th January 2013, 13:33
  2. monitor a guitar signal strength, then output a DC level?
    By HankMcSpank in forum General
    Replies: 24
    Last Post: - 1st December 2009, 08:01
  3. PIC16F684 + LCD to use the 256bytes of EEPROM - HELP
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 7th March 2008, 14:19
  4. 20 Mhz Crystal, simple blinking LED
    By BenjaminsShinob in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 16th October 2007, 05:06
  5. Help with sound command in 2 programs
    By hyperboarder in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 5th July 2007, 20:36

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules