Hi.

Im using the PIC18F45K80 for the very first time and use a 64MHz external clock source.
To test the new hardware, and to see that it's alive, I just blinks en LED.
The example blinks the LED way to fast, I just can se a flicker, but if I increse the pause to 5000, then it blinks 36 times in one minute.
Anyone got an idea why this happens?

Code:
while 1
    high portd.7
    pause 500
    low portd.7
    pause 500
wend

Here is my complete code:
Code:
' PIC18F45K80 Configuration Bit Settings
' Basic source line config statements

#CONFIG
    CONFIG RETEN = OFF
    CONFIG INTOSCSEL = HIGH
    CONFIG SOSCSEL = HIGH
    CONFIG XINST = OFF
    CONFIG FOSC = EC3
    CONFIG PLLCFG = OFF
    CONFIG FCMEN = OFF
    CONFIG IESO = OFF
    CONFIG PWRTEN = ON
    CONFIG BOREN = OFF
    CONFIG BORV = 3
    CONFIG BORPWR = ZPBORMV
    CONFIG WDTEN = OFF
    CONFIG WDTPS = 1048576
    CONFIG CANMX = PORTB
    CONFIG MSSPMSK = MSK7
    CONFIG MCLRE = ON
    CONFIG STVREN = OFF
    CONFIG BBSIZ = BB2K
    CONFIG CP0 = OFF
    CONFIG CP1 = OFF
    CONFIG CP2 = OFF
    CONFIG CP3 = OFF
    CONFIG CPB = OFF
    CONFIG CPD = OFF
    CONFIG WRT0 = OFF
    CONFIG WRT1 = OFF
    CONFIG WRT2 = OFF
    CONFIG WRT3 = OFF
    CONFIG WRTC = OFF
    CONFIG WRTB = OFF
    CONFIG WRTD = OFF
    CONFIG EBTR0 = OFF
    CONFIG EBTR1 = OFF
    CONFIG EBTR2 = OFF
    CONFIG EBTR3 = OFF
    CONFIG EBTRB = OFF
#ENDCONFIG


'************************* DEFINES ******************************
define osc 64


define adc_bits 12    ' Set number of bits in result
define adc_clock 3     ' Set clock source (3=rc)
define adc_sampleus 50    ' Set sampling time in uS




'lcdout $FE,$80 rad 1, $FE,$C0 rad 2
define lcd_dreg portc
define lcd_dbit 0
define lcd_rsreg portc
define lcd_rsbit 4
define lcd_ereg portc
define lcd_ebit 5
define lcd_bits 4
define lcd_lines 2
define lcd_commandus 3000
define lcd_dataus 100



'************************ REGISTERS *****************************
ancon0 = 100000                                                  
ancon1 = 000000                                                  
adcon2.7 = 1                                                        




'*********************** PORT CONFIG ****************************
trisa = 100000                                   'porta direction 0=OUTPUT 1=INPUT
porta = 000000                                   'porta preset
trisb = 010111                                   'portb direction 0=OUTPUT 1=INPUT
portb = 000000                                   'portb preset
trisc = 000000                                   'portc direction 0=OUTPUT 1=INPUT
portc = 000000                                   'portc preset
trisd = 111111                                   'portd direction 0=OUTPUT 1=INPUT
portd = 110000                                   'portd preset
trise = 001111                                   'porte direction 0=OUTPUT 1=INPUT
porte = 000000                                   'porte preset




'****************************************************************
'*******************    MAIN PROGRAM     ************************
'****************************************************************
while 1
    high portd.7
    pause 500
    low portd.7
    pause 500
wend


end