Charlie-plexing

[richard]

led__tris____port___ t______p
1___1100___0010__12__,__ 2

yes t and p are tris and port in decimal form for us humans

i can't run your code exactly my setup is wired differently to yours and different to my drawing too it appears
hence my muddled led 11 , any of the others may may be mislabled also . i was just happy to get the leds lit up , its to jumbled up to rework it.


i have never tried charlieplexing before, looks like the leds need to lit 15 to 20 at least times per second to minimise flicker. i was going to try a 4x4x4 charlieplex led cube but i'm having doubts now about driving 64 leds @ 20hz and having enough cpu time left to do anything else without using a pic18

[AvionicsMaster1]

Couple of things. In your schematic I don't see any current limiting resistors at each pin. They are necessary. When defining the oscillator speed osc needs to be OSC. I think the spaces in your lookup table are some of the problem. Try removing them and see what happens.