|
Re: Comparator voltage reference module
My problem is solved by using a 220 uf capacitor in my thermocouple amplifier. Now another problem arose .I think my circuit hangs.After running fine for a hour display on seven segment goes off.When I re- start circuit it works again.What can I do to rectify it.
|
Re: Comparator voltage reference module
Hard to answer without a schematic.
How is your power supply, enough current? Do other devices turn on during this time and take up too much current?
EDIT: Blink a LED in this part just to be sure nothing is going wrong.
Code:MAIN: ADCON0.2=1 GO: IF ADCON0.2=1 THEN GO
Last edited by Demon; - 16th December 2014 at 20:22.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks