Hserin with Array

[JKaiser]

Thanks Richard,

I went ahead and set the array a little larger than I needed.

dummy VAR BYTE
Hits VAR BYTE
test8 VAR BYTE[44]
ESP1 VAR BYTE[2]
ESP2 VAR BYTE[2]

Main: 
HSERIN[WAIT ("GET"), str test8\44]      ', WAIT ("GET") and load data
hserout [str test8\44, 13, 13]
arrayread test8, 43, mAIN,[wait ("ESP1="), STR esp1\2]
arrayread test8, 43, mAIN,[wait ("ESP2="), STR esp2\2]
hserout ["ESP1=", STR esp1\2, 13]
hserout ["ESP2=", STR esp2\2, 13]

GoTo Main

[Demon]

Byte banging. :-)

I'd test using only one byte instead of array. I'd Hserin wait for start character, process byte (could be moving into 256 byte array, increment bytes found counter), Hserin byte, goto process byte until receive end character, process array, start over.

Start-end can be anything you won't usually receive #$%&*+<>~|√π§Δ£¢€¥^°±{}/\!¡©®™℅[]¿?().

Hserin one byte multiple times might be more efficient than always receiving a large array, or it might not.

Robert

[JKaiser]

Robert,

I started off in that direction but ended up confused in the loop trying to pull out parts of the array (GET /?ESP1=R1&ESP2=R2&ESPx=%25 HTTP/1.1) and separate the parts for ESP1 and ESP2 vars. I will definitely revisit it before moving to far forward.

John