when 128k is not enough

[longpole001]

one interesting thing i was thinking about in relation to i/o pin speed for 18f67k22 it allows the system clock at 64mhz full speed out on Reference clock output , signal is bit unclean and puting through a buffer helps a lot ,

microchips reponce for 16bit EMB operations would be the key

[Demon]

one interesting thing i was thinking about in relation to i/o pin speed for 18f67k22 it allows the system clock at 64mhz full speed out on Reference clock output ...

Good idea, except you'd end up with code that runs at 64MHz when it's on the PIC, and 25MHz when it's from the external source no?

Robert