RC servo to PIC controlled via RC transmitter

[Dickeysbbq]

How is the servo angle controlled using the RC transmitter since there is no coding involved?

And the servo didn’t come with a manual nor have I been able to find one online. Sorry this is my first experience with any kind of servo.

Thanks

[Amoque]

I think this is very doable... You might start by looking at the "PULSIN" or "COUNT" functions - they are for measuring or counting incoming pulses. Output, for only one servo, I think nothing fancy is required.

There is a thread here discussing it - even in PicBasic: http://www.rc-cam.com/forum/index.ph...-signal-w-pic/

[Acetronics2]

Have a look here ...
http://www.societyofrobots.com/actuators_servos.shtml

Alain

[Archangel]

. . . and DO avail youself of the forum search feature, I got from using just the word servo :http://www.picbasic.co.uk/forum/sear...archid=1323450

[Dickeysbbq]

. . . and DO avail youself of the forum search feature, I got from using just the word servo :http://www.picbasic.co.uk/forum/sear...archid=1323450

No Matches?

And thanks Amoque for the link, that could be very useful!

[Archangel]

There were about 30 matches when I posted, SO. . . IN THE SEARCH BOX type servo and click the little spyglass icon. It Works.