Life after 2k w/ 16F648

[Acetronics2]

Hi, Dwayne

Thanks

I'll try that this week-End ... on the Breadboard, Electronics is not my job !!!

What feds me up is that ALL the IF THEN tests I place after this part of code( wich crosses the 2K limit ...) have a YES answer ... whatever the test does.

I'll try to confirm with a " IF 1 = 0 THEN ..." ... we'll see then.

I'll also try to move my subs at the real END of the program ( I have a GOTO - GOTO part added after the subs ) REMEMBER it runs like that on a 16F628 ....
AND everything has END separators not to punch through.

IF you want the source ... it's the R/C magic box !!! ( parallelling and trimming center and half travel for two servos driven by one channel )

Alain

[Acetronics2]

Hi, Folks ...

The problem is solved ... but that doesn't give me the explanation !!!

I Only placed better the GOTO - GOTO part BEFORE THE SUBs ... Then everything works well !!!
So, I note Subs MUST be placed before or after any program ...

But the return pile should not have been affected by a GOTO-GOTO section ...

Some compiler secrets are still alive ....

Alain