PWM GENERATION OF 25nS - 70nS outputs

[longpole001]

any code worth putting into the 18f67k22 i have on hand hendrick , i am assuming the simple commands wont cut it and the registers need to be setup to make use of it ?

 define HPWM4_TIMER 2       ' HPWM4 TO USE TIMER 2 

 hpwm 4 ,xx ,xxx   'CPP4  Wduty , freq

[richard]

as I stated in post 4 for the range of pulses you specified the pwm resolution is very limited
0b000 = 0ns
0b001=15.6ns
0b010=31.2 ns
0b011=46.8 ns
0b100=62.4 ns
0b101= over range

and as pedja089 stated a fixed 30ns deadtime means hpwm will not cut it / the period reg will need to be changed with every change in pulse width to maintain the dead time