Space vector PWM and ASM translation

[pxidr84]

Hello,

I'm implementing Space Vector PWM in PBP in order to control with variable speed an 3-phase AC motor.

The base of my work is the AN955 from Microchip.
http://ww1.microchip.com/downloads/e...tes/00955a.pdf

In order to modify the output frequency, you have to modify the speed of the rotating vector Vs. (page 3)

So a "Degree_constant" is pre-defined (in my case 39)
The "Required_motor_speed" is in my case 50
So the "Vector_update_step_size" is 39*50=1950
And "Vector_angle"="Vector_angle"+1950

This is explained in page 8.

But I don't really understand the source code provided, especially that "Carry" thing (in ASM) :

;*************************************************************************************
;ISR FOR VECTOR ROTATION AND PHASE PWM DUTY CYCLE UPDATE
;*************************************************************************************
ISR_PWM
	BCF	PIR3,PTIF				;CLEAR PWM TIMER INTERUPT FLAG
	BTFSS	ACSVM_FLAGS_1,FWD_REV
	BRA	FIND_VECTOR_ANGLE_FOR_REV_DIR
	MOVFF	PARAMETER_BUFFER+LOC_UPDATE_STEP_LSB,WREG	;INCREMENT VECTOR BY UPDATE STEP SIZE
	ADDWF	VECTOR_ANGLE_LSB,F
	MOVFF	PARAMETER_BUFFER+LOC_UPDATE_STEP_MSB,WREG
	ADDWFC	VECTOR_ANGLE_MSB,F
	BNC	READ_TIME_TB_COUNT			;DUE TO VECTOR INCREMENT, FOR CARRY = 0, CALCULATE CORRESPONDING TIME VALUES
	INCF	SECTOR_NO,F				;DUE TO VECTOR INCREMENT, FOR CARRY = 1, INCREMENT SECTOR NO
	BRA	CHECK_SECTOR_OF
FIND_VECTOR_ANGLE_FOR_REV_DIR
	MOVFF	PARAMETER_BUFFER+LOC_UPDATE_STEP_LSB,WREG
	SUBWF	VECTOR_ANGLE_LSB,F
	MOVFF	PARAMETER_BUFFER+LOC_UPDATE_STEP_MSB,WREG
	SUBWFB	VECTOR_ANGLE_MSB,F
	BC	READ_TIME_TB_COUNT
	INCF	SECTOR_NO,F
CHECK_SECTOR_OF
	MOVLW	0X05
	CPFSGT	SECTOR_NO
	BRA	READ_TIME_TB_COUNT
	CLRF	SECTOR_NO				;FOR SECTOR NO. ROLL OVER, REINITIALIZE SECTOR NO. TO 0
READ_TIME_TB_COUNT
[...]

Can anyone would translate this ASM part of code in something more "PBPish"?

Thanks

[pxidr84]

Finally found myself the carry problem... just to have to read the STATUS system register.

if STATUS.0=%1 then
@ incf _sector
STATUS.0=%0
endif