Problem with port A of 16f913

[amodpathak]

I have added .but no result.pls guide me if I have done anything wrong with my program regarding if then... Statement.As I am using active low buttons.

[Demon]

First, TRISA=1 is not what you want. You want to set pins 2 and 5 as input:

TRISA=%00100100

Start counting from right, 0 to 7.

Next, keep things simple. Make a copy of this program and remove all code after MAIN.

Then make 2 LEDs turn on and off by pressing the 2 inputs buttons.

Once that works, add the rest a bit at a time.

Robert

[amodpathak]

Thanks sir.