RFID Issues.... HELP !!!!!

[andybarrett1]

Thank you all for help.

I "think" I now see what was going on...Not been able to prove it though ... yet !

Amoque is right about his comment re:- other peoples code..... Point taken :-)

Arrays and counts are not my area at all in software..... Well non of it is really!

I struggle.... But I give it a go..... And sometimes things work... Mainly thanks to this forum

Thank you all for help... As Always.

Back to sunny Scunny on Wednesday Steve... BOS is calling!

[Demon]

When I hit a wall, I copy just the specific logic on a 16F628, or whatever else you can run the debugger (I'm still on PBP 2.60c).

I read in values as they are read (doesn't have to be an actual RFID reader, as long as sequence of characters is the same).

Then I go line by line, check each variable, making sure they contain what I expect, that the logic flows as expected. This is the hard part in using other people's code.

If I can't figure it out using the debugger, I ditch the code and try another approach.

Robert

[andybarrett1]

Ditch the code and try another approach

Is What I did..... Not as pretty as using counts and for/next but it works..... Does what I want :-)

I am picking up lots of help and advice here though.... Which will come out along the way !!

I have just upgraded to 2.60C.... !!! Really not sure if I need 3.00

Seems most folks are 2.50x or 2.60x

[EarlyBird2]

Is What I did..... Not as pretty as using counts and for/next but it works..... Does what I want :-)

I am picking up lots of help and advice here though.... Which will come out along the way !!

I have just upgraded to 2.60C.... !!! Really not sure if I need 3.00

Seems most folks are 2.50x or 2.60x

I am sad to hear this and I feel that I have failed in some way. Never give up in the search for perfection and ignore the defeatists is my advice. So now it works you should have time to try again to perfect the counts and loops method.

[Amoque]

Once again EarlyBird provides sagely advice... I have build an aquarium controller recently (turns on/ off lights, monitors temperature, warns of "low flow"... that sort of thing). My first version works, but is very inefficient and not complete as I'd like, so version two was started. Most every weekend I wrestle with it, but Sunday nights I reload version one. I'm surprised at both the software and the hardware I made work as my skills have improved. I hope you find this as well, Andy.

[andybarrett1]

I am sad to hear this and I feel that I have failed in some way. Never give up in the search for perfection and ignore the defeatists is my advice. So now it works you should have time to try again to perfect the counts and loops method.

Not at all the case Steve... Work commitments and lack of time due to other ventures dictates when I can play with Pics.

The RFID issues and the Morse are ongoing projects.... and are being worked on as a rolling living thing...The updated Morse code is almost complete if you can remember your useful suggestions re :- labels.

RFID is taking a little longer... but it is a steep learning curve for me.

Also I need to look up new words "sagely".... Means Wise Advice. He is right.

Thank you again... Sagely one !