Hi Henrik!
Thanks! You are always a good friend and a very big help and I mean that sincerely. The PIC returns a "VOLTS" value of 5824 representing the .441 volts I see on a voltmeter. If I divide 5824 by 16 then the reading would be 364. I changed the code to be /16 rather than /10. Using a conversion chart where 5.00 volts equals 4096 then 364 is really close. The sensor does vary a little about every 28 second it will read either + or - 4 using the divide by 16 value or 5824 then 5888 without the divide. Not sure why this happens, it's not temperature related and the reference port and sensor port are connected together with a piece of tubing. I do not know how to display the value in the ADCON2 register to do a check.

Best, Ed