pbp3 has no var type of nibble as previously mentioned use type BYTE
are you sure that code is for a max31855 ?
because that code reads the chip temp not the THERMOCOUPLE temp
|
Re: Basic stamp code does not works.
pbp3 has no var type of nibble as previously mentioned use type BYTE
are you sure that code is for a max31855 ?
because that code reads the chip temp not the THERMOCOUPLE temp
|
Re: Basic stamp code does not works.
Yes, it works just fine on BS2. The code reads both data, I just enabled single one, to see if problem is in reading.
|
Re: Basic stamp code does not works.
Try setting your TRIS register.
|
Re: Basic stamp code does not works.
It took me two days to figure out
when connecting to BS2, I was reversing the pins, so pinout in code was correct for that code only. Everything works just fine, thanks!
|
Re: Basic stamp code does not works.
Well I mentionned pins in my post and I was first to reply so I'm taking credit for solving this.
Robert
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks