Originally posted by Melanie
OK... this is for PBP... I'm not familiar with your IDE's Basic.

LCDOut $FE,$01 ' Clears your LCD, sets cursor to Line 1 Column 1
LCDOut "Hex Value:" 'text for the line 1
LCDOut $FE,$C0 ' Cursor to Line 2 Column 1
LCDOut HEX2 AN0," ".HEX2 AN1," ",HEX2 AN2 ' Formatted text for line 2
' Note the space between displayed values
Pause 2000

Refer to the PBP manuals LCDOut command to see what I've done.

Melanie

About the code you gave me...I included it on my code but the compiler PBP cannot understand ADCON1 and LCDINIT. Why can revise it for Im still learning PBP. thanks.