Simple answer is to run the PIC at 3.3 volts. In fact, many of the PICs are designed for this voltage. So just make the switch to low power and be done.
|
Re: Flash chips running with 3.3v and have 5v input tolerance
Simple answer is to run the PIC at 3.3 volts. In fact, many of the PICs are designed for this voltage. So just make the switch to low power and be done.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks