Then there most likely is something wrong with CONFIG1 settings.
Robert
Edit: Last time I used USB on an 18F2550, I think I had to use 48 MHz.
If you have an 8 MHz oscillator, then CONFIG1 has to be set accordingly.
|
Re: StartUSB board from MikroE
Then there most likely is something wrong with CONFIG1 settings.
Robert
Edit: Last time I used USB on an 18F2550, I think I had to use 48 MHz.
If you have an 8 MHz oscillator, then CONFIG1 has to be set accordingly.
Last edited by Demon; - 1st June 2014 at 15:11.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks