LCD RS bit wiring with 16F685

[RCtech]

Hi everybody.
After spending time since many days and looking everywhere on this forum and other, I don't find where is my mistake.
Below, y'oull se my working program if I connect the LCD Register Select bit on PORTA.4.
But... It's better for my PCB to connect it on PORTC.6.

If I do that, my LCD doesn't work and I don't know why.

Is there anyone who know ?

Here is the code :

@ device PIC16F685, intrc_osc_NOCLKOUT, wdt_off, pwrt_on, mclr_off, protect_off, bod_on
DEFINE NO_CLRWDT 1         

Define OSC 4			 
INTCON = %10001000     
OSCCON = %01100111	
VRCON  = 000000   
ADCON0 = 000000       

Define ADC_BITS 10
Define ADC_CLOCK 3            
Define ADC_SAMPLEUS 50 
ADCON0.7 = 1                     ' Right justify result

ANSEL  = %00000001               ' Set pin AN0 to AN7 (AN0) to analog input, the rest to digital (for future use)
ANSELH = %0000                   ' Set pins AN8 to AN11

TrisA = 001111            
TrisB = %00000000
TrisC = %11111111

Clear                       

LOW TRISA                             
LOW TRISB
LOW TRISC

Define LCD_COMMANDUS 2000
Define LCD_DATAUS 50

DEFINE LCD_DREG PORTB               ' Set LCD Data on PORTB
DEFINE LCD_DBIT 4                   ' Set starting Data bit on PORTB.4 (0 or 4) if 4-bit bus i.e, PortB.4-PORTB.7
DEFINE LCD_RSREG PORTA              ' Set LCD Register Select on PORTA
DEFINE LCD_RSBIT 4                  ' Set LCD Register Select bit on PORTA.4 (PORTA.3 is only in input mode)
DEFINE LCD_EREG PORTC               ' Set LCD Enable on PORTC
DEFINE LCD_EBIT 7                   ' Set LCD Enable bit on PORTC.7
DEFINE LCD_BITS 4                   ' LCD in 4 bit mode
DEFINE LCD_LINES 4                  ' 4 lines LCD display
   
Pause 500

AFF:
         
LCDOut $FE, 1                                      ' Clear the display
PAUSE 500
'----------LINE 1
LCDOut $FE, $80, "Line 1 for test"
PAUSE 1000
GOTO AFF

END

Now if I change

DEFINE LCD_RSREG PORTA
DEFINE LCD_RSBIT 4

to:

DEFINE LCD_RSREG PORTC
DEFINE LCD_RSBIT 6

and rewiring the RS pin to PORTC6 (Pin #8), it doesn't work.
I'm sure it's for a very simple reason but I don't find which one.

Thanx a lot for any help.

[EarlyBird2]

You have set

TrisC = %11111111

which makes PORTC6 an input. I would have thought it needs to be output for a LCD?

[RCtech]

You have set

TrisC = %11111111

which makes PORTC6 an input. I would have thought it needs to be output for a LCD?

Arrrg ! The only thing and the most simple I didn't checked !!
Sometimes, we are looking for things so far and what we want is just font of our eyes...
You're right, it was mistake. Now, everything is okay.

Thanx a lot EarlyBird2

[EarlyBird2]

Pleased I helped.