Help with Maxim Ibutton "IF THEN ELSE" statements please

[andybarrett1]

Hi Henrick

Yes works fine with button....But!

A lot of the time it needs to sit waiting for a button (looping till it sees one... then it jumps to sub routine if right button) "If" wrong button applied I need to jump out and go elsewhere !

So yes a lot of waiting with no button.

[EarlyBird2]

Andy,

I get it now!

You are validating ibuttons that are not always present. In fact most of the time there will not be an ibutton to read.

You are saying you need to detect the presence of an ibutton and when detected check it's serial number and if correct take some action (open a lock for example) if incorrect take some other action (sound an alarm for example)

Is this true?

[andybarrett1]

That is the Badger!

Yes.

[EarlyBird2]

Your program needs a loop that checks for the presence of an ibutton and if not present continue looping other wise jump out the loop into a serial number read/verify routine eventualy going back to the loop.

Any ideas of how to test for an ibutton present?