PIC16F1824, problem with oscillator and RA3,RA4,RA5

[gunayburak]

'************************************************* ***************
'* Name : UNTITLED.BAS *
'* Author : BURAK GÜNAY *
'* Notice : Copyright (c) 2014 [select VIEW...EDITOR OPTIONS] *
'* : All Rights Reserved *
'* Date : 6.5.2014 *
'* Version : 1.0 *
'* Notes : 16F1824 RA<5:3> input mode *
'* : *
'************************************************* ***************

#header
errorlevel -303 ; suppress Program word too large
#ENDHEADER

#config
__CONFIG _CONFIG1, _FOSC_INTOSC & _WDTE_OFF & _PWRTE_ON & _MCLRE_OFF & _CP_OFF & _CPD_OFF & _BOREN_OFF & _CLKOUTEN_OFF & _IESO_OFF & _FCMEN_OFF
__CONFIG _CONFIG2, _WRT_OFF & _PLLEN_OFF & _STVREN_OFF & _BORV_19 & _LVP_OFF
#ENDCONFIG
'---------------------------------------------------------------------

DEFINE OSC 4

PORTA=%000000 : ANSELA=%00000 : TRISA=%111000
PORTC=%00000000 : ANSELC=%0000000 : TRISC=%00000000

START:

IF PORTA.3=1 THEN
GOTO LOOP1
ELSE
GOTO LOOP2
ENDIF

GOTO START


LOOP1:

IF PORTA.4=1 THEN
PORTC.0=1
ELSE
PORTC.0=0
pause 500
PORTC.0= 1
pause 500
PORTC.0= 0
ENDIF

GOTO START


LOOP2:

IF PORTA.5 = 1 THEN
PORTC.0 = 1
ELSE
PORTC.0 = 0
ENDIF

GOTO START







This is the code you should be using ..

[billys7]

When i compile it, it shows me syntax error in the lines from #header till #ENDCONFIG

[billys7]

Ok. I compile it. According to http://melabs.com/support/config_defaults.htm i change the settings in PBP 16F1824.inc file and i add @ at the beggining of config.

I will inform you for the results.
Thank you!