Struggling again with SEROUT2 and numbers format

Results 1 to 12 of 12

Threaded View

  1. - 11th April 2014, 12:56 #9
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,643

    Did you find this post helpful? Yes | No

    Default Re: Struggling again with SEROUT2 and numbers format

    from the manual :-
    The resolution of PULSIN is dependent upon the oscillator frequency. If a 4MHz oscillator is used, the pulse width is returned in 10us increments. If a 20MHz oscillator is used, the pulse width will have a 2us resolution. Defining an OSC value has no effect on PULSIN. The resolution always changes with the actual oscillator speed.

    more info
    @16 MHz that's 2.5uS units
    8.5mS =3400 ,1.5mS =600
    Last edited by richard; - 11th April 2014 at 13:12.
« Previous Thread | Next Thread »

Similar Threads

  1. Still Struggling with the formula!
    By Ramius in forum mel PIC BASIC Pro
    Replies: 17
    Last Post: - 10th April 2012, 06:58
  2. Struggling Newbie
    By plakey in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 18th March 2012, 14:05
  3. Struggling with a P18f2550
    By chrisshortys in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 7th November 2011, 07:58
  4. Still Struggling with IF THEN
    By Russ Kincaid in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 25th March 2007, 10:47

Members who have read this thread : 2

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules