No, there is no feedback to the LCDOUT routines.
If the program stops or the chip resets when trying to display things, it could be that you have LVP enabled in the configs, and the LCD uses the PGM pin.
|
Re: 4 x 20 LCD display with PB3 - Pin 5 High or Low?
No, there is no feedback to the LCDOUT routines.
If the program stops or the chip resets when trying to display things, it could be that you have LVP enabled in the configs, and the LCD uses the PGM pin.
DT
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks