Longitude is always the first, followed by latitude, for each pair. For simplicity, let's assume that West and South are negative lat/long, as is a common convention. For example purposes, I'm going to use 32.123 W, 14.321 N. The key thing is to do the following.:
Longitude
1. Add 180 to the longitude, and take the integer value /20, and add one. Then figure out which letter of the alphabet that corresponds to, usually written in upper case. The example will be 147.877/20=7. Adding one will give the 8th letter of the alphabet, or G. Note 7.877 is remaining.
2. Take the remainder of what is left, and divide by 2, rounding down. This is the number, no conversion required. The example will give a value of 3. Note 1.877 is remaining.
3. Take the remainder that is left, and multiply by 12, and add one. Round down to the nearest integer.. This is the letter of the alphabet, usually written in lower case. The example gives a value of 22+1=23. This will be the letter w.
Latitude
1. Add 90 to the latitude, and take the integer value /10, and add one. Then figure out which letter of the alphabet that corresponds to, usually written in upper case. The example will be 104.321/10=10. Adding one will give the 8th letter of the alphabet, or J. Note 4.321 is remaining.
2. Take the remainder of what is left, and round down. This is the number, no conversion required. The example will give a value of 4. Note 0.321 is remaining.
3. Take the remainder that is left, and multiply by 24, and add one. Round down to the nearest integer.. This is the letter of the alphabet, usually written in lower case. The example gives a value of 7+1=8. This will be the letter g.
Putting them together by pairs, and alternating first longitude then latitude, gives the grid square for 32.123 W, 14.321 N to be locator GJ34wg.
Bookmarks