Mikro's Visual GLCD with PBP3

[longpole001]

vid ( remove the "txt" extension from the file name) shows testing of large fonts on T6963C controller, 240x64, digits fonts were created in font creator and ported to PBP, cpu running at 64mhz , the digits use 90 bytes each , and this is all its doing for this test , so it need to be a lot faster for the project in the end.

this would work a lot better if the bytes can be loaded as a one group from the vram , instead of loading the address pointer then the byte , but i need some help to do that