resolved to start with , display looking ok using the lib , with a lot of mods , speed sorted due to running at 64mhz now and changes to how the graphics mode is selected and used , but a indexed vram code is really needed to load a large font char to gain any speed for display

if some code in pbp that can do this i would lov to see an example, and will send a coin to u if you have a working example that can use the lib

I willl post code conversion routines to use the font generator code to the lib at a later date after the project is sorted a bit further but i would recommend that if you are playing with a t6963c GLCD that the lib linked is a good starting point even if its close to 8 years old , but in the end you will need to rewrite it to suit your requirements

cheers

Sheldon