16F1826 cannot get MCLR to act as an INPUT

[SOTASOTA]

SOLVED!! I had a bad LED. All is working now. Sorry for the confusion.

[aratti]

In post # 3 you wrote:

The LED is working if I set PortB.1=1 manually in code...........

Which is in contradiction with your last post.

Regards

Al.

[SOTASOTA]

In post # 3 you wrote:


Which is in contradiction with your last post.

Regards

Al.

A poor solder joint that worked "sometimes". So, I replaced the LED thinking it was it initially. The re and re fixed the problem. I should have said a bad solder connection to the LED. But I only found this out after replacing the LED.