Do you have the pins on the 71 pulled high?
|
Re: LM71 reads garbage sometimes.
Do you have the pins on the 71 pulled high?
Dave
Always wear safety glasses while programming.
|
Re: LM71 reads garbage sometimes.
No, I should?
|
Re: LM71 reads garbage sometimes.
Tried 4.7k pull-ups on all pins, does not helps.
|
Re: LM71 reads garbage sometimes.
From cs low to the out of data the maximum time delay is 70 ns. you are using 5 ms. play with that delay using pauseus.
See data sheet timing table.
Cheers
Al.
All progress began with an idea
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks