Driving a 2x16 LCD with only One Pin and 74HC595

[struppi81]

OK,

now I post my Final, good working code.

I implement the ability to add delays for LCD_COMMANDUS in the main programm and the part, if somebody want to use SEROUT2 with a Flow Control Pin. (I don't have test it yet)

With my LCD's, I could set the LCD_COMMANDUS Value to 0.

It would be very interesting if somebody could test it out with an slower LCD and post which value he have to set or general experiences.

A big thanks to Darrel Taylor.

Zip File implements:
One_Wire_74HC595_Main.pbp
One_Wire_74HC595.bas
VirtualPort.bas

[WMakoto]

Hello.

In the simulation proteus, sometimes appear strange characters, is this normal?