Scampy,
You have the Darlington PNP upside down, the emitter needs to go to the positive rail. And you need a resistor in the Darlingtons base as well. If you don't put a resistor there you'll basically short out the supply with the base emitter diode(s) in the Darlington - not good. Use 1k or whatever.

EDIT: Oh, and the emitter of the small NPN must go to ground - not to the collector of the Darlington.

AvionicsMaster1,
Thanks, and you're welcome! Perhaps not the best explaination from a purely technical standpoint but never the less.... :-)

/Henrik.