PIC16F1828, "Symbol not previously defined (CCPTMRS0)", need help!

[rayzrocket]

DT is correct, after trying several variants of ASM code that didn't work; I was buying and downloading the PBP3.0.
The PBP3.0 is nicely packaged! Download the 128Mb flavor with all the new MPASM/Microcode Studio stuff...and you may need to get the latest Beta programmer software for newer PICs.
The multiple hardware PWMs on the PIC work from the multiple Timer2's now that I used PBP3.0
$$ well spent, and for a good cause to keep the PB biz going!

I still have a problem with keeping the hardware PWM going, it stops when I use HSER or ADC on other pins, eventhough the hardware PWM is coming out of a default ccp pin(that is not eusart by default)
..I haven't figured it out yet..

thanks all !!

[rayzrocket]

Ok, the hardest problems are the one's when you are the problem yourself.
I had an error in a supporting device's code, fixed it, and now all works good.
BUT,
It would not be possible without using the PBP3.0
thanks DT !

[rayzrocket]

Thank you Olsson!!, that work-around is on the right track and I tried a few attempts as such, but no success.
The PBP3.0 works good and worth the $$ IMO.

all the best!