PIC16F1828, "Symbol not previously defined (CCPTMRS0)", need help!

Results 1 to 11 of 11

Threaded View

  1. - 20th December 2013, 15:30 #4
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default Re: PIC16F1828, "Symbol not previously defined (CCPTMRS0)", need help!

    This error was fixed in PBP 3.0.0.0 (Aug 2011)
    There is no patch for 2.60, but you can set the CCP registers directly instead of using HPWM.
    Last edited by Darrel Taylor; - 20th December 2013 at 15:40.
    DT
« Previous Thread | Next Thread »

Similar Threads

  1. "Writing error" and "communication timeout" PIC16F877a bootloader
    By slashdash in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 14th November 2013, 03:32
  2. How can I "see" if a PCF8574 is "alive" in the I2C bus
    By nomada in forum Serial
    Replies: 3
    Last Post: - 15th October 2012, 08:06
  3. "symbol not previously defined" on 16F1933 - fuse issue i think
    By comwarrior in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 2nd January 2011, 03:24
  4. Symbol not previously defined
    By Archangel in forum Code Examples
    Replies: 2
    Last Post: - 27th December 2008, 09:52
  5. " Help please re "CTCSS and getting a sine wave out" from Mathew 11th March 2004
    By Bitzn in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 16th February 2005, 20:05

Members who have read this thread : 0

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules