Changing ADCON0 to a value of 7 and changing the SW PWM pins to C1 and C2 made the clock to something, but it's still not running. The clock displayed 45:00 and then counted up in seconds (45:01, 45:02 etc) until it reach 14:10 and then displayed the 45:51. It remained displaying this "time", then changed to 45:52 a minute later, followed by 45:53 etc but there was no change in the case and the LEDs didn't light.

Not sure if changing ADCON0 to 7 (all digital) had a bearing on things