PULSIN ON PORTF and PORTG ON 16F1947

[longpole001]

not sure if a simulator show this to be working for this chip by chance ?

[Art]

Do this:

Whatever your minimal config and setup for PULSIN on two ports here,
and make a pin that DOES work and a pin that DOES NOT work an input
if PBP requires it for PULSIN.

@ nop
@ nop
@ nop

PULSIN on a pin that does work

@ nop
@ nop
@ nop

PULSIN on a pin that does not work
'pulsin PORTF.2,1,Leader

@ nop
@ nop
@ nop

Then post source and compiled hex. You may not have to.
It's easy to at least tell if the bank switching is happening,
but maybe not the LCD configuration.