using DS1307

[Scampy]

Cheers - Between our replies I found that I could do as you suggested, although I didn't know about the $01 address part. I assume where I had $00 the is the RTCSec bit, so using the $01 tells the code to read from the second bit (RTCMIN) ?

Thanks for your help

[Amoque]

Yes, but understand only that where you use the word "bit" is actually a byte. $00 is "%00000000", $01: "%00000000" ... like that. It is how you can read and write the AM/PM bit and read Status bits to verify the clock is running:

IF RTCHour.6 = 0 then 24H mode enabled.

Enjoy...