Problem with 16F886 and LCD on PortC

[florin]

I try these and... nothing. The program run (I put a LED who blink). Any advise, please ?

[Heckler]

Is it possible that the CONTRAST on the LCD is set too high?

[florin]

Solved. DB4 from LCD not conected Thanks.

[Demon]

What about analog, pwm or some pther feature enabled on selected ports?

Robert

[florin]

What about analog, pwm or some pther feature enabled on selected ports?

Robert

I use this
ANSEL=0 ;porturile A si B sunt digitale
ANSELH=0
ADCON0.0=0
SSPCON.5=0 ;dezactiveaza portC serial
RCSTA.7=0