Another nice thing about using a 4MHz x-tal and PLL'ing up to 48MHz is it can be done at 3.3 volts. If you were wanting to run the same chip at 48MHz with an x-tal you would need 5 volts.
|
Re: All about Occillators? Frequency/PLL?
Another nice thing about using a 4MHz x-tal and PLL'ing up to 48MHz is it can be done at 3.3 volts. If you were wanting to run the same chip at 48MHz with an x-tal you would need 5 volts.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks