SERIN2 and Proteus Simulation

[uuq1]

The problem is solved with some minor modifications. Thanks again uludere72.

I am pasting the code and the design file for others, who may go through the same problem in future.

[uludere72]

your welcome ...

[uuq1]

Another problem in simulation is that the modifiers cant be used like the statement :

serin2 serialInput, 396,[WAIT("X"), DEC testWord, WAIT("Z")]

Any clue about the solution?

[BobK]

Hello uuq1,

What type of program opens a .dsn file that you included in the last zip file?

Thanks!

BobK

[uuq1]

The .dsn file is a design file which is created and simulated by Proteus.

[uludere72]

u can use like this

SerIn2 pinin,baud,200,start,[WAIT("X"), STR tempStr\8\"Z"]

[uuq1]

Got the solution. The error was due to the settings of virtual terminal in Proteus.
I have added an LCD (in standard 4 bit mode) to display the data received.
The data being expected by the program is charachters sandwiched between charachters X & Z e.g. X45Z , X458Z etc
As described in the virtual terminal, the data received is in the form of ASCII charachters.
I have got alot of help from this forum, therefore am attaching the complete project with this thread to help the future comers of this forum.

Special Thanks to uludere72.