Questions on Darrel's Instant Interrupts

[rsocor01]

what clock speed are you using ? the chip can do 32mhz that helps too

I'm using 16MHz, but I will try 32MHz right away like you suggested. Also, I will make my interrupt routine as short as possible.

isn't pir1.1=0 resetting the tmr2 int flag
and
_Handler TMR2_INT, _ClockCounter, PBP, yes
the yes on the end resets the flag too
its a bit redundant if time is that critical

Hmm, I wasn't sure what that yes was for .