Hey Guys,

Maybe you can give me some ideas, I'll try to explain it good as I can.

I need to mount a few 5mm standard LEDs (2.54mm pitch) on a single side PCB.

But, I need to mount them on the copper side, and I can not solder them on that side.

The LEDs are separated 10mm from the PCB with some plastic spacers on the copper side.

And I have pass through holes for them with no copper around from the copper side to the component side.

Now, this is the thing, I need to connect the LEDs to the copper side in some way and I can't figure it out how.

Is there some kind of dual row header, with both male and female connectors? Or any other ideas?

I'm asking this because I don't have access to the copper side to solder the LEDs when everything is mounted on a box.

Hope I was able to explain myself. Thanks Guys!

Daniel.