Help Needed with arrays

[HenrikOlsson]

Hi Chris,
Have you read Melanies excellent primer on the subject?

Basically like you have it but IF arraydat.0(C) = 1 then....

/Henrik.

[Normnet]

Chris

The following compiles OK

Norm

  '4520
  @ __CONFIG _CONFIG1H, _OSC_XT_1H
  @ __CONFIG _CONFIG2L, _BOREN_ON_2L
  @ __CONFIG _CONFIG2H, _WDT_ON_2H
  @ __CONFIG _CONFIG3H, _MCLRE_ON_3H & _PBADEN_OFF_3H
  @ __CONFIG _CONFIG4L, _LVP_OFF_4L & _XINST_OFF_4L

  DEFINE OSC 4

  CLEAR
  sSEROUT_PIN VAR PORTC.1
  sBAUD CON 19697  '3313 = INVERTED 300   USE 19697 = 300   16416 = 19200 BAUD

  arraydat VAR BIT(26)
  C VAR BYTE
  '***********************************************
  GOTO START

  ONE:
  SEROUT2 sSEROUT_PIN,sBAUD,["sub ONE",13]
  RETURN

  ZERO:
  SEROUT2 sSEROUT_PIN,sBAUD,["sub ZERO",13]
  RETURN

  START:
  PAUSE 1000

  SerOut2 sSEROUT_PIN,sBAUD,["START",13]
  PAUSE 100

  MAIN:
'  arrayadat = %01010101011111111000000001
  arraydat[0] = 1
  arraydat[1] = 0
  arraydat[2] = 0
  arraydat[3] = 0
  arraydat[4] = 0
  arraydat[5] = 0
  arraydat[6] = 0
  arraydat[7] = 0
  arraydat[8] = 0
  arraydat[9] = 1
  arraydat[10] = 1
  arraydat[11] = 1
  arraydat[12] = 1
  arraydat[13] = 1
  arraydat[14] = 1
  arraydat[15] = 1
  arraydat[16] = 1
  arraydat[17] = 0
  arraydat[18] = 1
  arraydat[19] = 0
  arraydat[20] = 1
  arraydat[21] = 0
  arraydat[22] = 1
  arraydat[23] = 0
  arraydat[24] = 1
  arraydat[25] = 0

  FOR C = 0 TO 25
    IF arraydat[C] = 1 THEN
      Gosub ONE
    Else
      Gosub Zero
    EndIf
  NEXT C

'  goto main
  SEROUT2 sSEROUT_PIN,sBAUD,["END",13]
  END