design question


Closed Thread
Results 1 to 9 of 9

Thread: design question

  1. #1
    Join Date
    Sep 2010
    Location
    Las Vegas, NV
    Posts
    305

    Default design question

    Since I've gotten Proteus I've been working on small projects learning some of the basics before I move on to bigger and hopefully better things. Inexplicably I've been going smaller not larger. I started with a 16F877A moved down to a 16F616 then a 12F683. Now I'm learning with a 10F222 and I noticed something that I don't understand.

    Staying withing the 10FXXX lineage, why would you build a circuit using a 10F200 when a 10F322 costs only ten cents more? I know there is a huge difference in memory, oscillator freq., ADC channels and many other. It just seems to me if I were designing a circuit I'd use the biggest bang for the buck, build in future expansion possibility while only stocking one chip.

    Your thoughts are appreciated.

  2. #2
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,563


    Did you find this post helpful? Yes | No

    Default Re: design question

    Hi,
    If you don't really NEED the extra features of 322 and you're making, say, 100k units of your desing then those mere 10 cents per unit equals 10k in the end - 10k pure profit - simple as that.
    For hobby use where you make 1 or 10 - it doesn't matter one bit, pick the one offering the greatest flexibillity. IF the design turns commercial you can always try to squeeze into a cheaper device.

    Those are my thoughts....

    /Henrik.

  3. #3
    Join Date
    Nov 2007
    Location
    West Covina, CA
    Posts
    219


    Did you find this post helpful? Yes | No

    Default Re: design question

    I bought some 10F322's along with some $5 dev boards from Mouser only to find that they were not supported yet by MicroCode Studio or mikroProg.
    Do you have a way to compile with PBP?
    Louie

  4. #4
    Join Date
    Sep 2010
    Location
    Las Vegas, NV
    Posts
    305


    Did you find this post helpful? Yes | No

    Default Re: design question

    Thanks Henrik, I keep thinking small as I doubt if I ever will complete a commercially viable product desireable by many more people than me. your thoughts are always appreciated.

  5. #5
    Join Date
    Jan 2009
    Location
    Miami, Florida USA
    Posts
    657


    Did you find this post helpful? Yes | No

    Default Re: design question

    Quote Originally Posted by AvionicsMaster1 View Post
    Thanks Henrik, I keep thinking small as I doubt if I ever will complete a commercially viable product desireable by many more people than me. your thoughts are always appreciated.
    Hi. I'm sure you have the knowledge to come up with a commercially viable product. Just concentrate on something that you like, for example avionics, and you will figure something out.
    "No one is completely worthless. They can always serve as a bad example."

    Anonymous

  6. #6
    Join Date
    Aug 2003
    Posts
    985


    Did you find this post helpful? Yes | No

    Default Re: design question

    Quote Originally Posted by AvionicsMaster1 View Post
    Staying withing the 10FXXX lineage, why would you build a circuit using a 10F200 when a 10F322 costs only ten cents more?
    They aren't really thinking like that, the later chip is a newer generation with features designed to obsolete the former.
    There was a time when the 16F84 was the same price as a 16F628 too, why would you want half the memory and less peripherals?
    Somewhere out there though, someone would still have been wanting the 16F84 to write existing hex files to.

  7. #7
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    2,956


    Did you find this post helpful? Yes | No

    Default Re: design question

    HEY! Don't diss the 16F628. I started with that PIC and still have a boatload on hand, somewhere. Same with the 16F877.

    Robert

  8. #8
    Join Date
    Aug 2003
    Posts
    985


    Did you find this post helpful? Yes | No

    Default Re: design question

    It is the 'F84 in that example that has half memory (1K) and less peripherals!
    The 'F628 is a beast, and I'd still choose it for small personal stuff that only needed
    a couple of pins because it's ready for more if the project runs away form you

    Quote Originally Posted by Demon View Post
    HEY! Don't diss the 16F628. I started with that PIC and still have a boatload on hand, somewhere. Same with the 16F877.

    Robert

  9. #9


    Did you find this post helpful? Yes | No

    Default Re: design question

    @Art - I couldn't agree more, and the std. F version will ran at 10Mhz on 3V

    George

Similar Threads

  1. Need a touchscreen design
    By Luckyborg in forum Adverts
    Replies: 5
    Last Post: - 29th April 2013, 00:48
  2. Replies: 6
    Last Post: - 18th September 2009, 19:30
  3. Circuit Design Question
    By bradb in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 11th August 2009, 08:18
  4. Design Advice
    By isaac in forum General
    Replies: 38
    Last Post: - 11th October 2008, 23:07
  5. Help getting design started....
    By sincity337 in forum Off Topic
    Replies: 5
    Last Post: - 12th November 2005, 14:21

Members who have read this thread : 0

You do not have permission to view the list of names.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts