sorry by my message, I wanted to say something else, programming language.
yes, the problem is DEFINE DBIT 2, I change pins and all correct in ISIS.

but I need pin C2-5 for data 4 bits of LCD
I tested this code

http://www.picbasic.co.uk/forum/showthread.php?t=7038

and I work with pin C2-5 for LCD data
RS in pin C0 and E in pin C1

all correct, ISIS work with my code and LCD_AnyPin.pbp solution.
But I tested my code in real PIC and not work, I modified configurations bits in MPLAB and nothing.
I think that must be some PIC configuration byte that is not properly configured, any help?

I all have this:
TRISA = %00111111 <-- all A pins are input
TRISC = %00000000 <-- only used for LCD 16x2
ANSEL = %00000011 <-- I need bit 0 and 1 for A/D
WPUA = 0
IOCA = 0