Computer Display?

Results 1 to 30 of 30

Threaded View

  1. - 8th August 2013, 02:14 #11
    Ramius's Avatar
    Ramius
    Ramius is offline Contributor
    Join Date
    Mar 2011
    Location
    Los Angeles, California
    Posts
    322

    Did you find this post helpful? Yes | No

    Default Re: Computer Display?

    Hi All!
    Basically the sensor goes into a TXB0104 at 3v and from the TXB0104 at 5v into the PIC. I have been trying to extend the 5v side from the TXB0104 to/from the PIC with Shiftin and Shiftout. This has clearly been a problem for others after several hours of searching the internet and no one seems to have published a solution. From the PIC 18F1320 through a MAX232CPE into Com1 using the ICD in PicBasic Pro you can see all the readings. While very difficult to do I did manage to place a 47mfd tant. cap to the back of the sensor so it could not be any closer/shorter! Attached is the drawing. Ed
    Attached Images Attached Images  
    Last edited by Ramius; - 8th August 2013 at 02:17.
« Previous Thread | Next Thread »

Similar Threads

  1. Two Versions of MPASM in the Same Computer???
    By rsocor01 in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 11th July 2011, 20:24
  2. PIC16F877A interface with computer
    By jonil22 in forum Serial
    Replies: 4
    Last Post: - 19th February 2008, 20:29
  3. Computer crash and PBP V2.45
    By Christopher4187 in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 24th January 2008, 20:57
  4. Some HID devcie on one computer
    By Shamir in forum USB
    Replies: 4
    Last Post: - 19th February 2007, 06:52
  5. read signal from computer
    By menhwa in forum Serial
    Replies: 1
    Last Post: - 18th February 2006, 04:28

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules