I2C CONFUSION, Help needed please

[LinkMTech]

I couldn't find detailed info on the Write/Read bit of the device address. But I will guess it is bit 7.
You need to Write to the device first using the address with the "Write" bit set.
$1B or %00011011 becomes $9B or $10011011

Without confirming the proper syntax of the commands, here's something off the top of my noodle:

This will cover steps 1~4 of Section 4.3.2 of the datasheet

I2CWRITE SDA,SCL,[Addr,Loc,]  ' Addr plus Write bit = $9B

This will cover steps 5~7 of Section 4.3.2 of the datasheet

I2CREAD SDA,SCL,[Addr,Loc]   ' Addr plus Read bit = $1B

Putting it together should get you moving in the right direction.

I2CWRITE SDA,SCL,[Addr,Loc,]  ' Addr plus Write bit = $9B
I2CREAD SDA,SCL,[Addr,Loc]   ' Addr plus Read bit = $1B

Here's a note to myself that might come in handy too: