I2C CONFUSION, Help needed please

Results 1 to 40 of 43

Threaded View

  1. - 27th July 2013, 16:05 #7
    FromTheCockpit's Avatar
    FromTheCockpit
    FromTheCockpit is offline Junior Member
    Join Date
    Oct 2009
    Posts
    83

    Did you find this post helpful? Yes | No

    Default Re: I2C CONFUSION, Help needed please

    Quote Originally Posted by Demon View Post
    From PBP manual about I2CREAD:

    "Constants should not be used for address..."

    Don't know if this can help.

    Robert
    I added two bytes - Addr & Loc
    Addr=$1B
    Loc=0

    Sent - I2CREAD SDA,SCL,Addr,Loc,[Value],Fail

    No Luck

    '-----------
    What is also confusing me is the control byte in the manual, the device datasheet does not mention any control byte.
    I have an address $1B which I am sending as control and location in the device is being sent as Address according to the manual.
    Last edited by FromTheCockpit; - 27th July 2013 at 16:18. Reason: More info
« Previous Thread | Next Thread »

Similar Threads

  1. Sample code for I2C text LCD needed
    By Alexey in forum Code Examples
    Replies: 4
    Last Post: - 15th September 2011, 01:29
  2. TMR0 Confusion
    By retepsnikrep in forum mel PIC BASIC Pro
    Replies: 15
    Last Post: - 19th August 2011, 11:55
  3. HPWM confusion
    By lerameur in forum General
    Replies: 12
    Last Post: - 5th November 2006, 10:09
  4. HPWM confusion
    By rossfree in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 3rd November 2005, 16:50
  5. DIV32 confusion
    By dmairspotter in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 7th October 2005, 21:24

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules